View PSP-1000-135_4655203.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ELECTRONIC COMPONENTS
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de

Anderungen vorbehalten / subject to change without notice
1000W Single Output with PFC Function
Features :
PSP-1000
series
Universal AC input / Full range AC input active surge current limiting Built-in active PFC function Protections:Short circuit/Over load/Over voltage/Over temperature Built-in constant current limiting circuit Current sharing up to 2 units or 2000W Built-in remote ON-OFF control Built-in remote sense function Built-in active current sharing and parallel function 3 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK LOAD OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC
(Note 5)
PSP-1000-5 5V 145A 0 ~ 145A 725W
Note.4 800W
PSP-1000-12 12V 75A 0 ~ 75A 900W 1000W 150mVp-p 10 ~ 13.2V 3.0% 0.3% 0.5%
PSP-1000-13.5 13.5V 67A 0 ~ 67A 904.5W 1000W 150mVp-p 12 ~ 15V 2.0% 0.3% 0.5%
PSP-1000-15 15V 60A 0 ~ 60A 900W 1000W 150mVp-p 13.5 ~ 18V 2.0% 0.3% 0.5%
PSP-1000-24 24V 37.6A 0 ~ 37.6A 902.4W 1000W 150mVp-p 20 ~ 26.4V 1.0% 0.2% 0.5%
PSP-1000-27 27V 33.6A 0 ~ 33.6A 907.2W 1000W 150mVp-p 24 ~ 30V 1.0% 0.2% 0.5%
PSP-1000-48 48V 19A 0 ~ 19A 912W 1000W 200mVp-p 41 ~ 56V 1.0% 0.2% 0.5%
RIPPLE & NOISE (max.) Note.2 100mVp-p 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 6.0% 0.5% 2.0% 24ms/230VAC
Note.6 90 ~ 264VAC
1500ms, 50ms/230VAC
1500ms, 50ms/115VAC at full load
24ms/115VAC at full load 127 ~ 370VDC 0.96/115VAC at full load 84% 5.6A/230VAC 63A/230VAC 84% 84% 86% 86% 86%
47 ~ 63Hz 0.96/230VAC 77% 11.2A/115AVC 32A/115VAC <2mA / 240VAC 115 ~ 140% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 95 (TSW1) Detect on the heatsink of PFC MOSFET 90 (TSW2) Detect the winding of output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 sink current <20mA
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 59.6K hrs min. MIL-HDBK-217F (25 278*129*127mm (L*W*H) 5.2Kg; 3pcs/16.3Kg/1.42CUFT )
HARMONIC CURRENT EMS IMMUNITY MTBF
OTHERS
NOTE
DIMENSION PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:PSP-1000-SPEC 2006-04-13
1000W Single Output with PFC Function
Mechanical Specification
PSP-1000
Case No. 924A
series
Unit:mm
63.5
4-M4
52
31.75
200 CONTROL
ADJ LED 2 4 3 2 1 8 7 6 5 4
83
113
O/P 6-M3 4-M6
129 39
8
38
32 185
240
25.75
47.5
Air flow direction
1
3
63.5 127
3 2 1
10
127 7
63.5
I/P 31.75
4-M4
52
200 278
AC Input Terminal Pin. No. Assignment
Pin No. 1 2 3 Assignment AC/L AC/N FG
DC Output Terminal Pin. No Assignment
Pin No. 1,3 2,4 Assignment DC OUTPUT +V DC OUTPUT -V
Control Pin. No Assignment : MOLEX 5559-NP uses 5558male crimp terminal
Pin No. Assignment Pin No. 1 P(Current share) 5 2 -S 6 G 3 7 RC4 8 Assignment Mating connector Terminal NC MOLEX 5556 NC MOLEX 5557-NR Female crimp Terminal +S receptacle RC+
Derating Curve
Output Derating VS Input Voltage
100 100
12 ~ 48V
90
80
80
60
5V
70
LOAD (%)
40
LOAD(%)
60 50 40
20
-10
0
10
20
30
40
50
60
70 (HORIZONTAL)
90
115
135
180
230
264
AMBIENT TEMPERATURE (
)

INPUT VOLTAGE (V) 60Hz
ELECTRONIC COMPONENTS
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Name:PSP-1000-SPEC File

2006-04-13
Anderungen vorbehalten / subject to change without notice

▲Up To Search▲

Price & Availability of PSP-1000-135

	To Download PSP-1000-135 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .